Home > Libraries > FLUIDA library examples
FLUIDA library examples
Gas transfer system
This example represents a flow of hydrogen through a system with significant frictional pressure losses and vessel heat transfer.
Hydraulic actuator
In this example, some FLUIDA components are arranged to simulate the behaviour of an actuator commanded by a signal applied to a 4-way valve.
Vacuum network
This example shows most of the FLUIDA capabilities and the use of several different components. It contains two tanks, a pressure regulator, a vacuum pump, some pneumatic valves, calibrated orifices, etc. The aim of the simulation is to control the pressure level in the tanks by switching the valves.
Water-hammer in a liquid line
This example shows the FLUIDA library capabilities concerning water-hammer analysis in a pipe line using a real properties fluid (two phase flow). The pipe is simulated by the "Pipe" component, which takes into account inertia forces, pressure losses, and phase changes.